ZPF THERM SP-G0.5 T5 HTH chip melting furnace O1746, used
Product information "ZPF THERM SP-G0.5 T5 HTH chip melting furnace O1746, used"
Chip melting furnace | |
Manufacturer | ZPF THERM |
Model | SP-G0.5 T5 HTH |
Capacity | 5000 kg Aluminum alloy |
Melting capacity | 1000 kg/h |
Year of Manufacture | 2008 |
Comments |
Technical Details | |
Clear tank dimensions | 1400 mm Width 2100 mm Length 600 mm Depth |
Space requirement | 3800 mm Width 5750 mm Length 4450 mm Height |
Tilting height | 1400 mm |
Transport crucible height at maximum tilt position | 1300 mm |
Maximal melting capacity (chips dry and clean) | approx. 500 kg Aluminum alloy/h |
Practical melting capacity | approx. 400 kg Aluminum alloy/h |
Burner | Industrial burner BIO 165, 60 -630 kWh |
Gas flow pressure upstream of gas control line | 100 m bar |
Gas flow rate | 70 m³ |
Heating | natural gas, Hu 10 kWh/Nm |
Total energy consumption for melting and heating dry and clean chips Heat melt to 720 °C and keep warm |
approx. 700 kWh/1000 kg Aluminum alloy / h |
Total energy consumption for melting and heating of preheated (200 °C), dry and clean chips Heating the melt to 720 °C and keeping it warm |
approx. 650 kWh/1000 kg Aluminum alloy / h |
Energy consumption when production is at rest, Keeping the melt at 720 °C with a full furnace |
approx. 60 kWh |
Melting temperature | 720 – 780 °C possible |
Burning off with chips | approx. 4% |
Burn-off with preheated, dry and clean chips | under 2 % |
Melt removal | Tilting of the furnace by cylinder with hydraulic aggravator |
Agitator | |
Gear motor (2 pieces) | 2 x 2.2 kW |
Agitator speed | approx. 80 U/min |
Diameter of stirrer | 350 mm |
Heating gas blower RG-30 | |
Volume flow | 30 m³/min |
Flue gas blower capacity | 2.6 kW |
Power hydraulic unit | 7.5 kW |
Electrical connected load | 17 kW |
Voltage | 230/400 Volt, 50 Hz |
Weight | approx. 25 000 kg |
Delivery time | September 2021 |
Price | on request |
Heating: | gas |
---|---|
Year of Manufacture: | 2008 |
seo_sold_out: | hide |