Mechanical Press   Manufacturer Spiertz Year of manufacture   Last revision   Comment The tools are aligned on the table with centering pins and fixed with screws.The tools are fixed to the slider with screws. Technical Data Press   Stamping force 320 t Slider Stroke 400 mm Slider Adjustment 325 mm Feeding Height From Table 280 -  430 mm Coil Width 800 mm Coil Weight 1400 kg Sheet Thickness 4 mm Number of strokes (idle run) 17-29 per min. Delivery time immediately Price on request

Punch press   Manufacturer Haulick Year of construction 1993 Last revision 2018 Note   Technical data Number of connecting rods / cylinders 2 Number of stössel effects 1 Material passing direction left-right Press   Pressing force 1250 kN Clamping surface 1150 x 840 mm Clamping plate thickness 100 mm T-slots n. DIN 650 Number of T-slots 7 Slot width 22 mm Slot spacing 150 mm Table height 1080 mm Stössel   Stroke rate max 300 /min Stö&aerospace;el adjustability 150 mm Stößel clamping surface 1180 x 650 mm Clamping spigot: hole diameter 52 mm  Accessories Strip-feeder GF 260 Delivery time On request Price On request

Mechanical Press   Manufacturer Benelli Year of manufacture 1995 Last revision   Comment The tools are aligned on the table with centering pins and fixed with screws.The tools are fixed to the slider with screws. Technical Data Press   Force 8000 kN Maximum pressing force 315 Mp Working before plunger lowering at max. press force 12,5 mm Max. Drawing depth of the press and drawing equipment 160 mm ram stroke 400 mm ram adjustment 400 mm Slide area length x width 3970 x 2500 mm Bolster area length x width 3530 x 1540 mm Number of strokes (idle run) 18 per min. Drawing device:   Counterholder force 63 Mp at air pressure of 3,5 Kp/cm²     Delivery time immediately Price on request

Mechanical Press   Manufacturer Erfurt Year of manufacture 1982 Last revision   Comment The tools are aligned on the table with centering pins and fixed with screws.The tools are fixed to the slider with screws. Technical Data Press   Maximum pressing force 8000 kN Working before plunger lowering at max. press force 12,5 mm Pressing force when using the max. drawing depth 110 Mp ram stroke 400 mm ram adjustment 400 mm Press Slide area length x width 2500 x 1400 mm Press table length x width 2500 x 1400 mm Max tool length 2430 mm     Number of strokes (idle run) 18 per min. Drawing device   Counterholder force 63 Mp at air pressure of 3,5 Kp/cm² Ejector force 10 Mp at air pressure of 4,8 Kp/cm² Drawing depth adjustment 160 mm Delivery time immediately Price on request

Punching press   Manufacturer Haulick Year of manufacture 1980 Last revision   Comment   Technical Data Press design   Number of suspensions 2 Number of slide actions 1 feedstock transport direction left to right Press   Force 1600 kN Table surface (left-right) 1500 mm Table surface (front-back) 1200 mm Thickness of bolster plate 240 mm Opening in bed (left-right) 1300 mm Opening in bed (front-back) 300 mm Number of T-slots 8 Slide   Slide force 1600 kN Table surface (left-right) 1550 mm Table surface (front-back) 1200 mm Stroke 120 mm Stroke rate max. 150 /min Slide adjustment 150 mm Stroke rate min, 15 /min Stroke rate max. 150 /min Tool assembly dimensions   Shut height (stroke down, adjustment up) BDC 470 mm Distance between columns (H-frame) 1600 mm Passline opening (free passage in side columns) 700 mm Free passe between side columns (height) 700 mm   Decoiler   Manufacturer Schleicher Year of manufacture 1974 Technical Data Decoiler   Coil weight max. max 5 t sheet width max. 650 mm Diameter of coil max. 1500 mm Mandrel expansion range 450 - 520 mm Leveller unit   sheet thickness 0.5 ÷ 2.5 mm Number of leveller rolls 6 Number of infeed/outfeed rolls 2 Feed velocity 6 - 30 m/min Loop controls yes Strip-feeder   Feeding step max 9999.9 mm Pilot release system yes Total height 4500 mm Weight 26 t Delivery time immediately Price on request

Blanking line   Manufacturer Müller Weingarten Year of manufacture 1998 Last revision   Comment   Technical Data Press   Force 4000 kN Length of stroke 250 mm Die height 1100 mm Slide adjustment 300 mm Slide area length x width 4000 x 2500 mm Bolster area length x width 4000 x 2500 mm Number of strokes (idle run) 18-80 per min. Basic memory 300 types of patterns Coil inner diameter from 508 uo to 610 Coil weight 20 ton Coil outer diameter 600 - 2000 mm Coil inner diameter from 508 up to 610 mm Coil weight max max 20 t Wide range of semi-finished product cutting from a circle   - sheet width 350 ÷ 2000 mm - sheet length 250 ÷ 3800 mm - sheet thickness 0.5 ÷ 3.5 mm Length of line 47 m Delivery time immediately Price on request

 Mechanic Press    Manufacturer  Müller-Weingarten  Model  VK 800.28.35  Year of manufacture    Comment  incl. coil feeding unit Typ 140 412      Technical Data    Design  single acting mechanic press   Working pressure  8000kN / 800t  Table dimensions  2800 x 2800mm  Ram dimension  2800 x 2800mm    more technical details on request      Delivery time  on request  Price  on request

 Mechanic Press    Manufacturer  Erfurt  Model  PKZZ I 500.2 FS  Year of manufacture  1992  Control system  Siemens S7  Comment  Sliding bolster    Cushion  Technical Data    Design  single acting double column press  Working pressure  5000kN / 500t  Table dimensions  2800 x 1800mm  Ram dimensions  2800 x 1700mm  Opening in table  2400 x 1250mm  Ram stroke  500mm  Mould height, max  1220mm    more technical details on request      Delivery time  on request  Price  on request

 Mechanic Press    Manufacturer  Müller-Weingarten  Model  VK 500.07.40  Year of manufacture  1990  Comment        Technical Data    Design  single acting mechanic press   Working pressure  5000kN / 500t  Table dimensions  2800 x 1100mm  Ram dimension  2800 x 900mm    more technical details on request      Delivery time  on request  Price  on request Subject to alterations and prior sale.

 Mechanic Press    Manufacturer  Danly  Model  S4 800-110-72  Year of manufacture    Comment        Technical Data    Design  single acting mechanic press   Working pressure  8000kN / 800t  Table dimensions  2800 x 1849mm  Ram dimension  2850 x 610mm    more technical details on request      Delivery time  on request  Price  on request

 Transfer press, mechanical    Manufacturer  Erfurt  Model  PE4-HTr-800.2/3400x2200/600 FS E  Year of manufacture    Comment  good condition      Technical Data    Pressing force ram  8 000 kN / 800 t  Number of strokes in neutral  8 to 25 / min  Ram stroke  600 mm  Tool hight, min  950 mm  Tool hight, max  1200 mm  Cushion in ram  5  Stroke  150 mm  Ejection force / cushion Step 1 + 2  800 kN  Ejection force / cushion Step 3 to 5  250 kN  Cushion in table  5  Stroke  200 mm  Counter force = ejection force Step 1+2  800 kN  Counter force = ejection force Step 3to5  500 kN  Numbers of steps  5  Transfer unit    Transfer step  600 mm  Closing way / mounting rail  200 mm  Lift stroke  100 mm  Distance between mounting rails  760 to 2200 mm  Adjustment / rail (stepless adjustable)  720 mm  Feeder    Feeder stroke  1250 mm  Transportation way /    magnet conveyor belt total  3900 mm      Delivery time  June 2014  Price  on request Subject to alterations and prior sale.

 Mechanic Press    Manufacturer  Müller-Weingarten  Model  DQ-1200  Year of manufacture  1991  Comment        Technical Data    Design  single acting stamping press  Table height over floor  616mm  Distance between column  2.000mm  Mounting hight  1.200mm   Working pressure  12.000kN / 1.200t  Table dimensions  3.600 x 1.500mm  Ram dimension  3.600 x 1.500mm  Ram adjustability  200mm  Stroke  500mm  Strokes per minute  10-30  Transfer feed  0-900mm  Transfer inner span closed / opened  800mm / 1.560mm    more technical details on request      Delivery time  immediately  Price  on request Subject to alterations and prior sale.

 Stamping press    Manufacturer  ZANI  Model  MOTION MASTER AR 100/2M12-10  Design  double-column stamping press  Year of manufacture  2007  Control system  Siemens S7 SPS, model 300  Drive motion  double knuckle-joint  Rated power at the max. stroke  1000 kN  Max tonnage f.e. connecting rod  50 - 50 %  Point of applic.of slow motion from BDC  15 mm  Automatic variable stroke  50 - 100 mm  Speed in continuous cycle  20 - 120 H/min  Distance between bolster/ram  400 mm  Bolster area dimensions (length x depth)  1250 x 900 mm  Through-hole in bolster for scraps  140 x 900 mm  Through-hole in the press base for scraps  140 x 900 mm  Distance from floor to top of bolster  900 mm  Ram area dimensions  1150 x 800 mm  Ram adjustment  100 mm  Max tool width  1200 mm  Distance between uprights  1300 mm      Accessories    Electronic roll felder  Typ APV 200  Palletizer  Typ PR-8 HS (0-24 1/min)      Condition  only 6463 working hours      Delivery time  immediately  Price  on request Subject to alterations and prior sale.

 Transfer press, mechanical    Manufacturer  Rovetta  Model  S4-20000/5000x2500/LD/ET3  Year of manufacture  1999  Comment  good condition    price as new approx. 4.000.000€  Technical Data    Pressing force  20 000 kN / 2000 t  Numbers of connecting rods  4  Table clamping size  5000 x 2500 mm  Ram clamping size  5000 x 2500 mm  Ram stroke  800 mm  Ram regulation  550 mm  Number of strokes  9 - 18 / min  Number of stations  8  Cushion    Cushion force  4 000 kN / 400 t  Cushion stroke  350 mm      Equipment  lateral moving bolster      Delivery time  immediately  Price  on request Subject to alterations and prior sale.

 Multiple-Die Press    Make   Schuler  Type  T3-2000-9-700  Year  1971  Pressure  2000 t  Number of pressing steps  9  Stroke  380 mm  Depth of drawing  130 mm  Dayligth  1395 mm  Diameter of blank / tape    Tape normally up to  600 mm  No. of stokes  13 stoke/min  Sheet thickness  max. 4,5 mm  Main drive motor  200 kW  Total power requirement  270 kW  Weight of the machine  ca. 400 t  Dimensions of the machine  ca. 14,2 x 5,5 x 8,2 m  max. pressing force stations 2-5  850 t  max. pressing force stations 6 - 9  850 t  max. cutting force on blanking station  300 t  Ram stroke on blanking station  100 mm  Tool center distance  700 mm  Height of bottom tools  410 mm  Clamping plate thickness  120 mm  Adjustment of blanking ram  20 mm  Distance between gripper rails 470 - 650  830 mm  Opening to each side  150 mm  max. band width for single row operation  610 mm  With zick-zack attachment  800 mm  Ejector force station 2  16 t  Station 3-9 each  each 8 tons without decoiler and    feeding line  discription   - machine overhauled and electrically modernized in 1985- gripper rails, die-cushions in all forming stations, waste shear, tool change shuttle- pneumatic die cushions in table- tool station 2 (1 triple cushion 480 tons, 150 mm stroke)- tool station 3-9 (each 1 cushion 160 to, 150 mm stroke)      Delivery time  immediately  Price  on request